Used M2000-3-10KP - 10,000 lbs Aircraft Weight Scale - 30,000 lbs Capacity

Out of Stock

All our used stock of this item has been sold. Check back later.

Ask Our Aviation Specialists
Live Chat | +1.252.585.4553 | Email

Need a Quote?

Use this form to get a quote by email today.
First Name:
Last Name:
Company Name: (optional)
Questions/Comments: (optional)
Aircraft Scales M2000-3-10KP

The used aircraft weight scale M2000-3-10KP is a great weight system for shops that do not have jacks for every type of aircraft. This set comes with three 30 inch ramps. The platforms handle up to 10,000 lbs for 30,000 lbs total aircraft weight.


  • Units conversion: lbs/kg
  • Resolution: +/- 520000 A/D internal counts
  • Sampling rate: 100 times a second per channel
  • Span stability: 2ppm/deg C
  • Zero Stability: 5nV/deg C
  • Linearity correction: 10 span entries
  • Calibration Method: calibration through software stored in flash memory
  • Calibration Sealing: physical seal or Class1 Audit Trail system, password protected
  • Tare: Keyboard and scale tare, multiple tare id's can be stored in memory
  • Time and Date: Y2K compliant time/date clock, internal battery backup
  • Power On: selectable on/off switch


  • Analog Output: optional 4-20mA board via Smart Wire
  • Serial Output: 2 full duplex RS232/RS422 ports
  • IO Interface: peripheral expansion through Smart Wire multi drop RS485 port
  • External IO: up to 6 channel setpoint via Smart Wire
  • Baud Rate: 150-32,400 bps, selectable


  • Size: 6 digit, 7 segment 1" red LED
  • Filtering: Fast Step quick response algorithm adjustable filter


  • Power Requirements: 110VAC 12VDC 1A
  • Temperature Range: -10deg C to + 40deg C
  • Setpoints: 6 programmable setpoints per channel
  • Sense Amplifier: differential amplifier with 4 and 6 wire
  • RFI Protection: filtered signal, excitation and sense lines


  • Canada: Class III/IIIHD 10000
  • USA: NTEP Class III/IIIl 10000
  • OIML: Pending
  • NIST traceable certification to calibration master

Platform Specifications

  • Machined from 6061 aircraft grade aluminum
  • Calibrated to customer specifications
  • Capacities are available in 5,000, 10,000lb platforms
  • Accuracy: 1/10th of 1%
  • Standard ramps are 30 inches long with a 7 degree incline for easy pull up
General Information
Part #M2000-3-10KP
ManufacturerAircraft Scales
Copyright © 2022 Pilot John International, a Carolina GSE Inc. Company