Woodward 1010-810, Flightweight Assembly Thrust Washer - Tempest PMA
Tempest AG1010-810-PMA
The Tempest AG1010-810 (Woodward OEM 1010-810) is an FAA-PMA replacement flyweight assembly thrust washer for Woodward applications.
- Supports smooth flyweight movement by providing a consistent thrust surface that helps reduce wear and friction in the flyweight stack-up.
- Helps maintain governor accuracy by preserving correct spacing and load transfer within the flyweight assembly during RPM changes.
- Improves overhaul consistency by replacing a high-wear washer with a correct OEM-referenced part number used in Woodward governor assemblies.
This thrust washer is commonly used by aviation governor overhaul shops and maintenance teams servicing Woodward constant speed propeller governors.
Installation notes
Always refer to the approved maintenance and overhaul manual for full installation guidance before starting work.
- Inspect the mating surfaces for scoring, discoloration, or embedded debris, and replace associated worn components as required by the overhaul manual.
- Use the governor manual stack-up order and handling practices to avoid burrs or distortion that can affect flyweight motion.
- After installation, complete the required bench checks and operational verification steps specified for the governor model.
Applications and fitment
AG1010-810 is used in Woodward governor flyweight assembly configurations where OEM 1010-810 is specified. Confirm compatibility by matching the OEM part number and verifying applicability to your governor model and serial number using approved parts lists and overhaul procedures.
Pilot John International offers Tempest PMA propeller governor parts for propeller overhaul shops, FBOs, and aviation technicians to support aircraft maintenance and ground support.
| General Information | |
|---|---|
| Part # | AG1010-810 |
| Manufacturer | Tempest |
| Shipping Information | |
|---|---|
| Product Weight | 0.01 lbs. |
| Product Dimensions | 0.2 x 0.2 x 0.1 in. |
| Schedule B | 8807300010 |
| ECCN | 9A991.d |
| Specifications | |
|---|---|
| Nominal dimensions | 0.2900 inch outside diameter, 0.1250 inch inside diameter, 0.0350 inch overall thickness (nominal). Confirm the allowable limits and inspection criteria in the approved Woodward governor manual. |
| OEM P/N | 1010-810 |
| Tempest P/N | AG1010-810 |
| Type | Flyweight assembly thrust washer (governor internal bearing and spacing washer) |
Customers also viewed
AIRCRAFT COMPATIBILITY
| Compatible Aircraft* | |
|---|---|
| Maule | M-4-210S - Rocket , M-4-210T - Rocket , M-5-210C |
PRODUCT REVIEWS
This item does not have any reviews yet.
QUESTIONS & ANSWERS
Tempest AG1010-810 is a direct FAA-PMA replacement for Woodward P/N 1010-810. Always verify compatibility with your specific propeller governor model and applicable maintenance documentation before placing an order.
The Tempest AG1010-810 Flyweight Assembly Thrust Washer is designed for use in aircraft equipped with Woodward model B210760 propeller governors. Matching replacement parts to the correct governor model is essential to ensure proper fit, function, and reliable operation.
The Tempest AG1010-810 Flyweight Assembly Thrust Washer manages the axial loads generated by flyweight movement within the propeller governor, reducing wear on adjacent components and helping maintain smooth, repeatable RPM response. By providing a low-friction bearing surface between rotating flyweight elements and stationary surfaces, it supports consistent RPM control and prolongs governor service life.
PJi offers the Tempest AG1010-810 as an FAA-PMA-approved replacement for the Woodward 1010-810 flyweight assembly thrust washer. View our full selection of Tempest propeller governor parts to find the correct component for your application.
For a deeper look at how propeller governors work, why proper maintenance matters, and how to identify compatible replacement components, refer to our Ultimate Guide to Aircraft Propeller Governor Maintenance.
