Agusta AW189: Aircraft Grease

Aircraft greases are formulated for specific performance requirements and environmental conditions.

• General-Purpose Grease: Used across various aircraft components such as wheel bearings, landing gear assemblies, hinges, and actuators. It provides strong protection against wear and corrosion.
  

• High-Temperature Grease: Designed to perform under extreme heat, making it ideal for aircraft engines, exhaust systems, and high-friction areas.
  

• Low-Temperature Grease: Maintains lubricating properties in sub-zero climates, ensuring smooth operation for aircraft exposed to cold environments.
  

• Water-Resistant Grease: Repels moisture and prevents washout, commonly used on wheel bearings and components exposed to rain or spray.
  

• Anti-Corrosion Grease: Contains additives that prevent rust and oxidation, extending the life of metal components.
  

• Silicone Grease: Non-reactive and stable, used to lubricate and seal O-rings, gaskets, and electrical connectors.
  

• White Lithium Grease: A multipurpose option that offers smooth lubrication and water resistance for hinges, door mechanisms, and linkages.
  

• Molybdenum Disulfide Grease: Reinforced with solid lubricants to handle high-load conditions in landing gear and other stress-prone areas.
  

• Synthetic Grease: Offers a wide temperature range, long service life, and superior stability under demanding flight conditions.

Note: Some aviation greases combine more than one of these performance characteristics.

Aircraft grease differs from lubricating oil primarily in consistency and staying power. Grease is a semi-solid lubricant composed of oil, a thickener, and additives, which gives it a gel-like structure that remains in place during operation. While both grease and oil reduce friction and wear, grease provides a sealing effect that helps block moisture and contaminants, thereby enhancing overall performance. It is less likely to leak or be displaced under gravity or centrifugal forces, making it ideal for components such as bearings and linkages that require long-lasting lubrication.

Mixing different greases is generally not recommended unless the manufacturer confirms compatibility. Greases vary in their base oils, thickeners, and additives – each designed for a specific application. Combining incompatible formulations can cause the grease to break down, soften, or lose its lubricating properties. Mixing greases may also damage seals and reduce bearing life. When switching to a new grease, it’s best to remove the old lubricant completely to ensure reliable performance.

Using the wrong grease can lead to seal damage, lubricant leakage, or contamination, ultimately resulting in mechanical failure. Incorrect lubrication may cause excessive friction, overheating, and premature wear on critical components such as bearings or actuators. These issues increase maintenance costs, reduce safety margins, and can lead to significant aircraft downtime. Always refer to the aircraft’s maintenance manual or manufacturer specifications to ensure proper grease selection for each application.

Aviation greases are specifically engineered to withstand the unique demands of flight, including rapid pressure changes, high speeds, and extreme temperatures. They offer enhanced resistance to oxidation, corrosion, and water washout compared to standard industrial greases. These specialized formulations ensure consistent performance and compliance with aviation standards, supporting safety and reliability in all flight conditions.

The frequency of lubrication depends on the aircraft model, component type, and operating environment. Manufacturers specify lubrication intervals in the aircraft’s maintenance manual to ensure safe and efficient operation. Factors such as high humidity, temperature fluctuations, or extended storage can affect these intervals. Adhering to the recommended schedule helps prevent wear, corrosion, and costly mechanical issues.

When selecting grease for aircraft maintenance, key properties to consider include the operating temperature range, load-carrying capacity, oxidation and corrosion resistance, water repellency, and compatibility with seals and other materials. The chosen grease should meet the specifications and performance standards established by the aircraft or component manufacturer. Using the correct product ensures reliable performance and compliance with aviation maintenance requirements.

Temperature directly impacts a grease’s viscosity and lubricating effectiveness. At very low temperatures, grease can become thick and sluggish, increasing resistance and reducing efficiency. At high temperatures, it can thin out or degrade, leading to increased friction and wear. Aviation greases are designed to remain stable across wide temperature ranges, ensuring consistent protection during takeoff, cruising altitude, and landing operations.

Store aviation greases in a cool, dry, and clean environment, away from direct sunlight or heat sources. Containers should remain tightly sealed to prevent contamination by moisture or dirt. Always follow the manufacturer’s storage recommendations and observe shelf-life limits. Proper storage helps maintain the grease’s consistency, performance characteristics, and compliance with aviation standards.

Yes. Always wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling aviation greases. Avoid prolonged skin contact and wash thoroughly after use. Refer to the product’s Safety Data Sheet (SDS) for detailed instructions on handling and disposal. Used greases should be disposed of in accordance with local environmental regulations to prevent contamination.

Proper lubrication minimizes friction, reduces wear, and prevents premature failure of aircraft components. In aviation, where safety and precision are paramount, inadequate lubrication can lead to mechanical issues that compromise performance and safety. Regular application of the correct grease ensures reliable operation, extends component life, and supports flight safety while reducing maintenance costs.

If you’re uncertain about which grease is suitable for a specific component or application, consult the aircraft’s maintenance manual or reach out to the component manufacturer for guidance. Using an incorrect grease can cause damage, non-compliance, or performance issues. For expert assistance, you can also contact PJi’s aviation specialists for personalized recommendations tailored to your aircraft and maintenance requirements.