Woodward 1418-830, Thrust Race Bearing - Tempest PMA
Tempest AG1418-830-PMA
The Tempest AG1418-830 (Woodward OEM 1418-830) is an FAA-PMA replacement thrust race bearing for Woodward applications.
- Provides a controlled thrust bearing surface that supports smooth governor response during RPM changes and power transitions.
- Helps protect adjacent bearing elements by replacing a worn or scored race with the correct OEM-referenced part number.
- Supports overhaul consistency by restoring the thrust bearing stack to a known baseline when bearing surfaces show distress.
This thrust race is commonly replaced during aircraft propeller governor overhaul and repair when inspection reveals scoring, brinelling, or surface wear on bearing contact faces. PJi® supports aviation maintenance professionals with OEM-cross referenced governor components used in constant speed propeller systems.
Installation notes
Refer to your aircraft and governor maintenance manual for complete installation procedures and torque values.
- Replace thrust races when there is visible scoring, spalling, brinelling, heat discoloration, or out-of-limit wear per the governor overhaul manual.
- Maintain strict cleanliness during assembly. Fine debris can damage bearing faces quickly and lead to repeat removals.
- Confirm the complete thrust stack configuration and mating parts condition. A damaged bearing element can quickly mark a new race.
Applications and fitment
Used in Woodward propeller governor thrust bearing stack configurations where OEM 1418-830 is specified. Confirm compatibility by matching the OEM part number and verifying the bearing stack callouts for your specific governor model and dash number in approved maintenance documentation.
Tempest AG1418-830 is the direct replacement for OEM 1418-830. Confirm the correct thrust race selection by governor model, dash number, and bearing stack configuration in approved maintenance data.
Pilot John International stocks Tempest PMA propeller governor parts for propeller overhaul shops, MROs, FBOs, and A&P mechanics supporting aircraft maintenance and ground support operations.
| General Information | |
|---|---|
| Part # | AG1418-830 |
| Manufacturer | Tempest |
| Shipping Information | |
|---|---|
| Product Weight | 0.03 lbs. |
| Product Dimensions | 1 x 1 x 0.2 in. |
| Schedule B | 8807300010 |
| ECCN | 9A991.d |
| Specifications | |
|---|---|
| Approval | FAA-PMA |
| Material and finish | Hardened bearing race manufactured to the OEM specification. |
| OEM P/N | 1418-830 |
| Tempest P/N | AG1418-830 |
| Type | Thrust race, bearing stack component for Woodward propeller governors |
Customers also viewed
AIRCRAFT COMPATIBILITY
| Compatible Aircraft* | |
|---|---|
| Hawker Beechcraft | 58 - Baron , 95-C55 - Baron , 95-C55A - Baron |
PRODUCT REVIEWS
This item does not have any reviews yet.
QUESTIONS & ANSWERS
Tempest AG1418-830 is a direct FAA-PMA replacement for Woodward P/N 1418-830. Always verify compatibility with your specific propeller governor model and applicable maintenance documentation before placing an order.
The Tempest AG1418-830 Thrust Race is designed for use in aircraft equipped with Woodward model A210800 propeller governors. Matching replacement parts to the correct governor model is essential to ensure proper fit, function, and reliable operation.
The Tempest AG1418-830 Thrust Race provides a hardened surface for thrust bearing elements, ensuring smooth axial load transfer and minimizing wear under rotational forces. Maintaining proper load paths within the propeller governor supports consistent RPM control and long-term reliability of moving components.
PJi offers the Tempest AG1418-830 as an FAA-PMA-approved replacement for the Woodward 1418-830 thrust race. View our full selection of Tempest propeller governor parts to find the correct component for your application.
For a deeper look at how propeller governors work, why proper maintenance matters, and how to identify compatible replacement components, refer to our Ultimate Guide to Aircraft Propeller Governor Maintenance.
