Woodward 182649, 7/32" ID X .070" Cross Section Plug O-ring - Tempest PMA
Tempest AG182649-PMA
The Tempest AG182649 (Woodward OEM 182649) is an FAA-PMA overhaul 7/32" id x.070" cross section plug o-ring for Woodward applications.
- Helps prevent oil seepage at plug locations by restoring correct O-ring size and compression.
- Supports reliable governor pressure retention by sealing a common service point in the governor body.
- Improves maintenance consistency by matching an OEM-referenced seal size used in Woodward governor parts lists.
This O-ring is commonly replaced any time a sealed plug is removed during maintenance, troubleshooting, or overhaul. PJi® supports aviation maintenance professionals with OEM-cross referenced governor seals used in constant speed propeller systems.
Installation notes
Always refer to the applicable aircraft and governor maintenance manual for complete installation procedures.
- Inspect the plug and groove surfaces for nicks, burrs, or thread damage that could compromise sealing.
- Use the lubrication and installation practices specified in approved maintenance data to avoid cutting the O-ring.
- After installation, perform the required leak check and confirm the plug is secured to the specified torque.
Applications and fitment
Used in Woodward governor configurations where OEM 182649 is specified for a plug sealing location. Confirm compatibility by matching the OEM part number and verifying the seal callout in the governor illustrated parts catalog for your specific model and dash number.
Tempest AG182649 is the direct replacement for OEM 182649. Confirm the plug seal location and size by governor model and approved maintenance data before ordering.
Pilot John International offers Tempest PMA propeller governor parts for propeller overhaul shops, FBOs, and aviation technicians to support aircraft maintenance and ground support.
| General Information | |
|---|---|
| Part # | AG182649 |
| Manufacturer | Tempest |
| Shipping Information | |
|---|---|
| Product Weight | 0.01 lbs. |
| Product Dimensions | 0.2 x 0.2 x 0.1 in. |
| Schedule B | 8807300010 |
| ECCN | 9A991.d |
| Specifications | |
|---|---|
| Approval | FAA-PMA |
| Material | Oil-resistant elastomer (verify exact compound requirements in the approved governor documentation) |
| OEM P/N | 182649 |
| Size | 7/32 in ID x 0.070 in cross section |
| Tempest P/N | AG182649 |
| Type | O-ring seal for plug application on Woodward propeller governors |
Customers also viewed
AIRCRAFT COMPATIBILITY
| Compatible Aircraft* | |
|---|---|
| Piper | Navajo |
PRODUCT REVIEWS
This item does not have any reviews yet.
QUESTIONS & ANSWERS
Tempest AG182649 is a direct FAA-PMA replacement for Woodward P/N 182649. Always verify compatibility with your specific propeller governor model and applicable maintenance documentation before placing an order.
The Tempest AG182649 Plug O-Ring is designed for use in aircraft equipped with Woodward model 210665 propeller governors. Matching replacement parts to the correct governor model is essential to ensure proper fit, function, and reliable operation.
The Tempest AG182649 Plug O-Ring seals threaded plug interfaces within the propeller governor, preventing oil leakage and preserving internal hydraulic pressure. Maintaining a reliable seal on plug connections helps ensure consistent oil flow and dependable RPM control throughout governor operation.
PJi offers the Tempest AG182649 as an FAA-PMA-approved replacement for the Woodward 182649 plug O-ring. View our full selection of Tempest propeller governor parts to find the correct component for your application.
For a deeper look at how propeller governors work, why proper maintenance matters, and how to identify compatible replacement components, refer to our Ultimate Guide to Aircraft Propeller Governor Maintenance.
