Tempest AG206337-PMA
The Tempest AG206337 (Woodward OEM 206337) is an FAA-PMA overhaul cover gasket for Woodward applications.
- Supports oil leak prevention by maintaining the designed seal between the governor cover and body mating surfaces.
- Helps preserve stable governing by preventing pressure loss and contamination pathways that can occur with aged or damaged gaskets.
- Improves overhaul quality by restoring correct gasket compression and sealing behavior when the cover is removed for service.
Cover gaskets are routine replacement items during governor disassembly because sealing surfaces and compression sets change with time and heat cycles. This gasket is intended for aviation constant speed propeller governor maintenance and overhaul.
Installation notes
These notes are general guidance only; always refer to the approved maintenance and overhaul manual for complete installation procedures.
- Clean and inspect mating faces for nicks or distortion before installing a new gasket.
- Use the torque values and tightening pattern in the governor maintenance manual to achieve even compression and avoid cover distortion.
Applications and fitment
Used on Woodward governor configurations where OEM 206337 is specified. Confirm compatibility by matching OEM part number and verifying governor model and serial number in the approved maintenance data.
Tempest AG206337 is the direct replacement for OEM 206337. Match the OEM part number and confirm applicability by governor model and serial number in the approved maintenance data.
Pilot John International supplies Tempest PMA propeller governor components to propeller overhaul shops, FBOs, MROs, and aviation maintenance technicians supporting aircraft maintenance and ground support.
| General Information | |
|---|---|
| Part # | AG206337 |
| Manufacturer | Tempest |
| Shipping Information | |
|---|---|
| Product Weight | 0.01 lbs. |
| Product Dimensions | 3 x 3 x 0.1 in. |
| Schedule B | 8807300010 |
| ECCN | 9A991.d |
| Specifications | |
|---|---|
| OEM P/N | 206337 |
| Tempest P/N | AG206337 |
| Type | Governor cover gasket |
Customers also viewed
AIRCRAFT COMPATIBILITY
| Compatible Aircraft* | |
|---|---|
| Cessna | 210 |
PRODUCT REVIEWS
This item does not have any reviews yet.
QUESTIONS & ANSWERS
Tempest AG206337 is a direct FAA-PMA replacement for Woodward P/N 206337. Always verify compatibility with your specific propeller governor model and applicable maintenance documentation before placing an order.
The Tempest AG206337 Cover Gasket is designed for use in aircraft equipped with Woodward model 210462 propeller governors. Matching replacement parts to the correct governor model is essential to ensure proper fit, function, and reliable operation.
The Tempest AG206337 Cover Gasket seals the governor housing to prevent oil leakage, preserving the hydraulic pressure required for accurate blade pitch control and safe governor operation. Maintaining a reliable seal under vibration and thermal cycling helps ensure consistent propeller speed regulation and reduces the risk of oil-related performance issues.
PJi offers the Tempest AG206337 as an FAA-PMA-approved replacement for the Woodward 206337 cover gasket. View our full selection of Tempest propeller governor parts to find the correct component for your application.
For a deeper look at how propeller governors work, why proper maintenance matters, and how to identify compatible replacement components, refer to our Ultimate Guide to Aircraft Propeller Governor Maintenance.
