Tempest AG210216-PMA
The Tempest AG210216 (Woodward OEM 210216) is an FAA-PMA replacement flat race bearing for Woodward applications.
- Provides a hardened running surface that helps reduce friction and wear where thrust loads are present in the governor mechanism.
- Supports consistent internal clearances, helping the governor respond predictably to speed changes and control inputs.
- Helps extend service life by replacing worn race surfaces that can contribute to rough operation, accelerated bearing wear, or unstable governing.
This bearing race is commonly replaced during aircraft governor overhaul and repair, especially when inspections show scoring, pitting, or abnormal wear.
Installation notes
These notes are general guidance only; always refer to the approved maintenance and overhaul manual for complete installation procedures.
- Replace any paired bearing elements if required by the overhaul manual, and ensure race and mating surfaces are clean and free of burrs.
- Use the assembly sequence and measurement checks specified in the governor manual to verify end play and proper seating.
Applications and fitment
Confirm compatibility by matching OEM 210216 and reviewing governor model eligibility and approved maintenance data for the specific installation. This part is used within Woodward governor configurations where correct thrust surfaces are critical to stable operation.
While built for aircraft propeller governor systems, similar bearing race concepts are used in other rotating machinery and speed control applications. Always follow approved procedures and certification requirements for your specific equipment.
Tempest AG210216 is the direct replacement for OEM 210216. Confirm applicability by governor model and serial number using approved data before installation.
Pilot John International stocks Tempest PMA propeller governor parts for propeller overhaul shops, MROs, FBOs, and A&P mechanics supporting aircraft maintenance and ground support operations.
| General Information | |
|---|---|
| Part # | AG210216 |
| Manufacturer | Tempest |
| Shipping Information | |
|---|---|
| Product Weight | 0.02 lbs. |
| Product Dimensions | 0.6 x 0.6 x 0.1 in. |
| Schedule B | 8807300010 |
| ECCN | 9A991.d |
| Specifications | |
|---|---|
| Approval | FAA-PMA (where applicable by installation and approved data) |
| OEM P/N | 210216 |
| Tempest P/N | AG210216 |
| Type | Flat bearing race |
Customers also viewed
AIRCRAFT COMPATIBILITY
| Compatible Aircraft* | |
|---|---|
| Hawker Beechcraft | 58 - Baron , 95-C55 - Baron , 95-C55A - Baron |
PRODUCT REVIEWS
This item does not have any reviews yet.
QUESTIONS & ANSWERS
Tempest AG210216 is a direct FAA-PMA replacement for Woodward P/N 210216. Always verify compatibility with your specific propeller governor model and applicable maintenance documentation before placing an order.
The Tempest AG210216 Flyweight is designed for use in aircraft equipped with Woodward model A210780 propeller governors. Matching replacement parts to the correct governor model is essential to ensure proper fit, function, and reliable operation.
The Tempest AG196406 Flat Bearing Race provides a precision, hardened surface that supports rotating or loaded components within a propeller governor, helping to transmit axial and thrust loads smoothly as internal parts move under pressure and RPM changes. By reducing friction and wear at critical contact points, this flat bearing race helps maintain stable RPM control, predictable governor response, and longer service life in the governor’s thrust load paths.
PJi offers the Tempest AG210216 as an FAA-PMA-approved replacement for the Woodward 210216 flat bearing race. View our full selection of Tempest propeller governor parts to find the correct component for your application.
For a deeper look at how propeller governors work, why proper maintenance matters, and how to identify compatible replacement components, refer to our Ultimate Guide to Aircraft Propeller Governor Maintenance.
