Tempest AG3056-510-PMA
The Tempest AG3056-510 (Woodward OEM 3056-510) is an FAA-PMA overhaul cover gasket for Woodward applications.
- Helps maintain a leak-resistant cover joint when installed with clean mating surfaces and the correct torque procedure.
- Supports stable RPM control by maintaining consistent gasket compression that helps preserve internal clearances.
- Common overhaul and service replacement item anytime the cover is removed during inspection, repair, or troubleshooting.
This gasket supports aircraft constant speed propeller governor maintenance where oil control integrity is essential to reliable performance.
Installation notes
These notes are general guidance only; always refer to the approved maintenance and overhaul manual for complete installation procedures.
- Inspect the cover and body for nicks, corrosion, or distortion and correct as allowed by the approved manual before installing a new gasket.
- Use the governor manual torque specification and tightening pattern to achieve even compression and avoid cover distortion.
Applications and fitment
Confirm compatibility by matching OEM 3056-510 and reviewing approved maintenance data for the applicable Woodward governor model and configuration. Correct gasket selection supports leak control and consistent governor behavior.
Tempest AG3056-510 is the direct replacement for OEM 3056-510. Confirm applicability by governor model and serial number in approved maintenance data before ordering.
Pilot John International supplies Tempest PMA propeller governor components to propeller overhaul shops, FBOs, MROs, and aviation maintenance technicians supporting aircraft maintenance and ground support.
| General Information | |
|---|---|
| Part # | AG3056-510 |
| Manufacturer | Tempest |
| Shipping Information | |
|---|---|
| Product Weight | 0.01 lbs. |
| Product Dimensions | 3 x 3 x 0.1 in. |
| Schedule B | 8807300010 |
| ECCN | 9A991.d |
| Specifications | |
|---|---|
| Approval | FAA-PMA (where applicable by installation and approved data) |
| OEM P/N | 3056-510 |
| Tempest P/N | AG3056-510 |
| Type | Governor cover gasket |
Customers also viewed
AIRCRAFT COMPATIBILITY
| Compatible Aircraft* | |
|---|---|
| Hawker Beechcraft | 58 - Baron , 95-C55 - Baron , 95-C55A - Baron |
PRODUCT REVIEWS
This item does not have any reviews yet.
QUESTIONS & ANSWERS
Tempest AG3056-510 is a direct FAA-PMA replacement for Woodward P/N 3056-510. Always verify compatibility with your specific propeller governor model and applicable maintenance documentation before placing an order.
The Tempest AG3056-510 Cover Gasket is designed for use in aircraft equipped with Woodward model 210462 propeller governors. Matching replacement parts to the correct governor model is essential to ensure proper fit, function, and reliable operation.
The Tempest AG3056-510 Cover Gasket seals the governor housing to prevent oil leakage, preserving the hydraulic pressure required for accurate blade pitch control and safe governor operation. Maintaining a reliable seal under vibration and thermal cycling helps ensure consistent propeller speed regulation and reduces the risk of oil-related performance issues.
PJi offers the Tempest AG3056-510 as an FAA-PMA-approved replacement for the Woodward 3056-510 cover gasket. View our full selection of Tempest propeller governor parts to find the correct component for your application.
For a deeper look at how propeller governors work, why proper maintenance matters, and how to identify compatible replacement components, refer to our Ultimate Guide to Aircraft Propeller Governor Maintenance.
