Tempest AGB-1316-PMA
The Tempest AGB-1316 (Garwin OEM B1316) is an FAA-PMA replacement flyweight pin for Garwin applications.
- Supports correct governor calibration by establishing the specified stack height or preload where shimming is required.
- Helps restore stable pressure behavior when inspection finds mixed, damaged, or incorrectly selected shim stacks from prior service.
- Commonly selected during overhaul based on measured setup values and the approved Garwin governor procedure.
Shimming is a precision step in aircraft governor service because small thickness changes can alter pressure and response characteristics.
Installation notes
Always consult the applicable maintenance manual for the full installation procedure before performing this work.
- Do not guess shim selection. Use measured setup values and the approved procedure for the governor model being serviced.
- Maintain strict cleanliness. Debris between shims can change effective thickness and alter calibration results.
Applications and fitment
Used on Garwin governors where OEM B1316 is specified. Confirm compatibility by matching the OEM part number and reviewing governor model and serial number applicability in approved maintenance data.
Tempest AGB-1316 is the direct replacement for OEM B1316. Match the OEM part number and confirm applicability by governor model and serial number in the approved maintenance data.
Pilot John International offers Tempest PMA propeller governor parts for propeller overhaul shops, FBOs, and aviation technicians to support aircraft maintenance and ground support.
| General Information | |
|---|---|
| Part # | AGB-1316 |
| Manufacturer | Tempest |
| Shipping Information | |
|---|---|
| Product Weight | 0.01 lbs. |
| Product Dimensions | 1 x 0.1 x 0.1 in. |
| Schedule B | 8807300010 |
| ECCN | 9A991.d |
| Specifications | |
|---|---|
| Approval | FAA-PMA replacement part |
| OEM P/N | B1316 |
| System | Garwin propeller governor, pressure control or relief-related setup stack |
| Tempest P/N | AGB-1316 |
| Type | Shim, governor calibration component |
Customers also viewed
AIRCRAFT COMPATIBILITY
| Compatible Aircraft* | |
|---|---|
| Cessna | 185 |
PRODUCT REVIEWS
This item does not have any reviews yet.
QUESTIONS & ANSWERS
Tempest AGB1316 is a direct FAA-PMA replacement for Garwin P/N B1316. Always verify compatibility with your specific propeller governor model and applicable maintenance documentation before placing an order.
he Tempest AGB1316 Flyweight Pin is designed for use in aircraft equipped with Garwin 34-828 series propeller governors. Matching replacement parts to the correct governor model is essential to ensure proper fit, function, and reliable operation.
The Tempest AGB1316 Flyweight Pin serves as the pivot axis for the flyweights, allowing controlled movement in response to RPM changes and enabling precise governor regulation. Maintaining secure flyweight motion under centrifugal forces helps ensure accurate RPM sensing and consistent propeller speed control.
PJi offers the Tempest AGB1316 as an FAA-PMA-approved replacement for the Garwin B1316 flyweight pin. View our full selection of Tempest propeller governor parts to find the correct component for your application.
For a deeper look at how propeller governors work, why proper maintenance matters, and how to identify compatible replacement components, refer to our Ultimate Guide to Aircraft Propeller Governor Maintenance.
