Woodward 3053-032, Die Cut Cover Gasket - Tempest PMA
Tempest AG3053-032-PMA
The Tempest AG3053-032 (Woodward OEM 3053-032) is an FAA-PMA overhaul die cut cover gasket for Woodward applications.
- Helps maintain a leak-resistant seal at the cover interface when installed on clean, flat mating surfaces with correct torque procedure.
- Supports stable governor operation by maintaining consistent gasket compression that helps preserve internal clearances.
- Common overhaul replacement item whenever the cover is removed to reduce the risk of seepage during return to service.
Cover gaskets are a key reliability item in aircraft constant speed propeller governor maintenance, especially during scheduled inspections and overhaul events.
Installation notes
Refer to the applicable governor and engine maintenance manual for full installation procedures, torque values, and inspection requirements.
- Clean and inspect mating faces for scratches, corrosion, or distortion before installing a new gasket.
- Use the torque value and tightening pattern specified in the governor manual to avoid uneven compression and cover distortion.
Applications and fitment
Confirm compatibility by matching OEM 3053-032 and reviewing approved maintenance data for the applicable Woodward governor model and configuration. Selecting the correct gasket part number matters because cover designs and sealing geometries can vary by model.
Tempest AG3053-032 is the direct replacement for OEM 3053-032. Confirm applicability by governor model and serial number in approved maintenance data before ordering.
Pilot John International supplies Tempest PMA propeller governor components to propeller overhaul shops, FBOs, MROs, and aviation maintenance technicians supporting aircraft maintenance and ground support.
| General Information | |
|---|---|
| Part # | AG3053-032 |
| Manufacturer | Tempest |
| Shipping Information | |
|---|---|
| Product Weight | 0.01 lbs. |
| Product Dimensions | 3 x 3 x 0.1 in. |
| Schedule B | 8807300010 |
| ECCN | 9A991.d |
| Specifications | |
|---|---|
| Approval | FAA-PMA (where applicable by installation and approved data) |
| OEM P/N | 3053-032 |
| Tempest P/N | AG3053-032 |
| Type | Governor cover gasket, die cut |
Customers also viewed
AIRCRAFT COMPATIBILITY
| Compatible Aircraft* | |
|---|---|
| Cessna | 310 , 320D - Skyknight , 320E - Executive Skyknight , 320F - Executive Skyknight , 335 , 340 , 401 , 402 , 414 , T310P , T310Q |
PRODUCT REVIEWS
This item does not have any reviews yet.
QUESTIONS & ANSWERS
Tempest AG3053-032 is a direct FAA-PMA replacement for Woodward P/N 3053-032. Always verify compatibility with your specific propeller governor model and applicable maintenance documentation before placing an order.
The Tempest AG3053-032 Die-Cut Cover Gasket is designed for use in aircraft equipped with Woodward model 210710 propeller governors. Matching replacement parts to the correct governor model is essential to ensure proper fit, function, and reliable operation.
The Tempest AG3053-032 Die-Cut Cover Gasket seals the governor cover to maintain oil pressure and prevent external leakage. Effective sealing supports consistent governor performance.
PJi offers the Tempest AG3053-032 as an FAA-PMA-approved replacement for the Woodward 3053-032 die-cut cover gasket. View our full selection of Tempest propeller governor parts to find the correct component for your application.
For a deeper look at how propeller governors work, why proper maintenance matters, and how to identify compatible replacement components, refer to our Ultimate Guide to Aircraft Propeller Governor Maintenance.
