Tempest AG3053-034-PMA
The Tempest AG3053-034 (Woodward OEM 3053-034) is an FAA-PMA overhaul cover gasket for Woodward applications.
- Provides a sealing barrier at the cover joint to reduce oil seepage when installed with the correct surface preparation and torque procedure.
- Supports consistent internal clearances by maintaining even gasket compression across the cover interface.
- Recommended replacement any time the cover is removed during troubleshooting, repair, or overhaul.
This gasket supports aircraft constant speed propeller governor maintenance where dependable sealing and correct assembly practices protect reliability.
Installation notes
These notes are general guidance only; always refer to the approved maintenance and overhaul manual for complete installation procedures.
- Verify the cover and body mating faces are clean, flat, and free of damage before installing a new gasket.
- Use the tightening pattern and torque specified by the governor manual to prevent distortion and uneven compression.
Applications and fitment
Confirm compatibility by matching OEM 3053-034 and reviewing approved maintenance data for the applicable Woodward governor model. Use the correct part number because cover gasket geometry and thickness can vary by configuration.
Tempest AG3053-034 is the direct replacement for OEM 3053-034. Confirm applicability by governor model and serial number in approved maintenance data before ordering.
Pilot John International stocks Tempest PMA propeller governor parts for propeller overhaul shops, MROs, FBOs, and A&P mechanics supporting aircraft maintenance and ground support operations.
| General Information | |
|---|---|
| Part # | AG3053-034 |
| Manufacturer | Tempest |
| Shipping Information | |
|---|---|
| Product Weight | 0.02 lbs. |
| Product Dimensions | 3 x 3 x 0.1 in. |
| Schedule B | 8807300010 |
| ECCN | 9A991.d |
| Specifications | |
|---|---|
| Approval | FAA-PMA (where applicable by installation and approved data) |
| OEM P/N | 3053-034 |
| Tempest P/N | AG3053-034 |
| Type | Governor cover gasket |
Customers also viewed
AIRCRAFT COMPATIBILITY
| Compatible Aircraft* | |
|---|---|
| Cessna | 310 , 320D - Skyknight , 320E - Executive Skyknight , 320F - Executive Skyknight , 335 , 340 , 401 , 402 , 414 , T310P , T310Q |
PRODUCT REVIEWS
This item does not have any reviews yet.
QUESTIONS & ANSWERS
Tempest AG3053-034 is a direct FAA-PMA replacement for Woodward P/N 3053-034. Always verify compatibility with your specific propeller governor model and applicable maintenance documentation before placing an order.
The Tempest AG3053-034 Cover Gasket is designed for use in aircraft equipped with Woodward model 210710 propeller governors. Matching replacement parts to the correct governor model is essential to ensure proper fit, function, and reliable operation.
The Tempest AG3053-034 Cover Gasket seals the governor housing to prevent oil leakage, preserving the hydraulic pressure required for accurate blade pitch control and safe governor operation. Maintaining a reliable seal under vibration and thermal cycling helps ensure consistent propeller speed regulation and reduces the risk of oil-related performance issues.
PJi offers the Tempest AG3053-034 as an FAA-PMA-approved replacement for the Woodward 3053-034 cover gasket. View our full selection of Tempest propeller governor parts to find the correct component for your application.
For a deeper look at how propeller governors work, why proper maintenance matters, and how to identify compatible replacement components, refer to our Ultimate Guide to Aircraft Propeller Governor Maintenance.
