Jet Craft Aviation Cessna 500 Jack Pad Kit - JC-GSK-C500
The Jet Craft Aviation JC-GSK-C500 - Cessna 500 Jack Pad Kit is an aircraft specific jack pad set designed to create a secure, correctly sized interface between your aircraft jack and the approved lifting points on the Cessna 500 airframe. These jack pad adaptors help distribute load correctly during lifting, reducing the risk of point damage, jack slippage, and maintenance delays during inspections, tire and brake work, gear swings, and scheduled hangar events.
Jet Craft Aviation builds precision, OEM equivalent aircraft maintenance tooling focused on safety, accuracy, and repeatability. For business aviation operators, MROs, FBOs, and flight departments, the right jack pads are a core part of safe aircraft jacking procedures. Outside aviation, similar jack adapter concepts are used by industrial maintenance teams wherever a controlled lifting interface is required.
Kit contents
- Compact protective storage case for organized transport and FOD control
- Aircraft specific nose and main jack pad adaptors sized for the designated jacking points
- Three Remove Before Flight flags for positive visual control
Features and benefits
- Engineered for Cessna 500 fitment to align with the aircraft jacking geometry and contact surfaces.
- Corrosion resistant construction intended for long service life in hangar and line maintenance environments.
- Provides positive engagement at the jack point to improve stability and reduce the chance of pad walkout during lift.
- Helps protect sensitive structural areas by keeping the jack load where the OEM intended.
- Supports faster setup for routine maintenance events by keeping the correct adaptors staged and labeled.
How it is used
Install the correct nose and main jack pads at the designated jacking points to match the aircraft receptacle and the jack head interface. Lift the aircraft only in accordance with the Aircraft Maintenance Manual using properly rated tripod or axle jacks and approved safety stands. Always verify correct pad selection, orientation, and full seating before applying load, then monitor for movement as weight transfers to the jacks.
Safety and compliance notes
- Confirm jacking procedures, lift points, and required safety equipment in the Aircraft Maintenance Manual before use.
- Use a flat, level surface and properly rated jacks, safety stands, and wheel chocks.
- Inspect the jack pads for damage, deformation, and contamination prior to each use. Remove from service if compromised.
Export & Compliance Information
- Schedule B (HTS): 8425.49.00
- ECCN: EAR99 — No export license required for most destinations
| General Information | |
|---|---|
| Part # | JC-GSK-C500 |
| Manufacturer | Jet Craft Aviation |
| Shipping Information | |
|---|---|
| Product Weight | 5 lbs. |
| Product Dimensions | 9.5 x 7.5 x 4.5 in. |
| Specifications | |
|---|---|
| ECCN | EAR99 |
| Product Dimensions | 9.5x7.5x4.5 |
| Schedule B | 8425.49.00 |
| Weight | 5lbs |
Customers also viewed
AIRCRAFT COMPATIBILITY
| Compatible Aircraft* | |
|---|---|
| Cessna | Citation I 500 |
PRODUCT REVIEWS
This item does not have any reviews yet.
QUESTIONS & ANSWERS
The Jet Craft Aviation JC-GSK-C500 jack pad kit is specifically engineered for the Cessna 500 series aircraft, providing a precision-fit interface between maintenance jacks and the aircraft’s approved jacking points. These pads are tailored to match the OEM hard points on the airframe, helping ensure a secure, stable lift during inspections and maintenance. Always confirm compatibility with your aircraft’s maintenance manual before use.
Model-specific jack pads distribute lifting loads precisely at the designated structural hardpoints, protecting the airframe from stress or damage that can occur with generic alternatives. They help prevent jack slippage and unintended contact with sensitive areas of the aircraft fuselage or gear. Proper pad selection supports safer, more predictable maintenance operations.
The kit includes nose and main jack pad adapters sized for the Cessna 500’s jacking geometry, a compact protective storage case for FOD control and organized transport, and “Remove Before Flight” flags to enhance visibility during maintenance. These accessories help keep tooling controlled and ready for use in hangar or ramp environments.
Because the adapters are pre-matched to the aircraft’s jacking points, setup time is reduced, and technicians can position the pads and jacks more quickly and confidently. The protective case also helps keep the pads organized, reducing search time between jobs. This streamlined workflow contributes to quicker turnaround during routine inspections or scheduled maintenance events.
Yes. The JC-GSK-C500 pads are compatible with a variety of properly rated tripod or axle jacks, as long as the jack capacity and ram interface match the aircraft’s maintenance requirements. It’s essential to use a jack that meets the aircraft’s weight and load specifications to maintain stability and safety during lift. Always consult the Aircraft Maintenance Manual (AMM) for approved jack types.
By concentrating compressive forces at intended contact surfaces, aircraft-specific jack pads help avoid unwanted deformation or damage to structural skins, gear attachments, or fuselage hardpoints. This precise load distribution supports the integrity of the airframe and extends its service life. Without the correct pad fit, uneven forces could compromise structural components over time.
By concentrating compressive forces at intended contact surfaces, aircraft-specific jack pads help avoid unwanted deformation or damage to structural skins, gear attachments, or fuselage hardpoints. This precise load distribution supports the integrity of the airframe and extends its service life. Without the correct pad fit, uneven forces could compromise structural components over time.
Before each use, technicians should inspect the jack pads for cracks, corrosion, deformation, or contamination that could affect seating or stability. Clean contact surfaces help ensure pads fully seat into the aircraft’s jacking points, and any compromised components should be removed from service immediately to avoid safety risks. Proper pre-use inspection is a critical step in safe jacking procedures.
Always use the JC-GSK-C500 pads on a flat, level surface, engage safety stands once the aircraft is lifted, and deploy wheel chocks to prevent movement. Confirm that pads are oriented and fully seated before gradually applying jack load, and never place hands or limbs between the aircraft and jack. Following published jacking procedures in the aircraft manual enhances safety and compliance.
Storing the jack pads in their protective case keeps them clean, organized, and free from corrosion or hangar contaminants. A dedicated storage solution also reduces the likelihood of tool loss or damage, making them quicker to retrieve for the next maintenance event. Good storage practice helps maintain pad performance and longevity.
While the JC-GSK-C500 pads are designed for durability, regular inspection and cleaning help maintain their safe function over time. Remove any buildup of grease, grime, or corrosion, and ensure that flags or visual indicators remain attached and visible. As with all ground support equipment, replacing worn or damaged pads promptly helps ensure reliability in future jacking operations.
