The Malabar 832R is a 35 ton capacity, three stage hydraulic jack designed primarily for use in jacking
the main and/or nose landing gear of various aircraft. The jack consists of a three stage cylinder and base
assembly, frame/reservoir assembly, valve block assembly and hand pump assembly.
Standard Features
- Cylinder assembly includes bronze lower bearings
for longer service life
- Single valve control for simple and easy aircraft
raising and lowering
- 5" diameter Heavy duty swivel casters and
retractable front wheel
- Retractable spring loaded front wheel provides
improved ground clearance for towing
- Check valve at the cylinder assembly prevents
lowering of load in the event of a host failure
- Two manual hand pumps (one high pressure, low
volume and one low pressure, high volume)
- Oil filter cap with filtered air vent and dipstick
- Hard chrome plated cylinder and plunger bores
- All unpainted parts are plated to resist corrosion
- Skydrol resistant paint (safety yellow)
- Factory proof load @ 150% of rated capacity
- One year standard warranty
- Fully enclosed shipping container with skid
Specifications
- Rated Capacity: 35 tons (31.8 m. tons)
- Low Height: 7 inches (178 mm)
- Hydraulic Lift: 12 inches (305 mm)
- Extension Screw: 3 inches (76 mm)
- Total Extended Height: 22 inches (559 mm)
- Base Width: 6.88 inches (175 mm)
- Cylinder Diameter: 6.88 inches (175 mm)
- Oil Pressure at Rated Capacity: 6770 psig (476 kg/sq cm)
- Safety Pop-off Valve set at: 38.5 tons (34.9 m. tons)
- Proof Load: 52.5 tons (47.6 m. tons)
- Floor Loading at Rated Capacity: 651 psi (46 kg/sq cm)
- Reservoir Capacity: 2 gallons (7.6 liters)
- Hydraulic Fluid: MIL-PRF-5606 or equivalent
- Maximum Towing Speed: 5 mph (8 km/h)
- Approximate Jack Net Weight: 360 lbs (163 kg)
Main Landing Gear
880, 890, A318, B717, B737-100 to 500, B757, BAC 1-11,
BAE146, C130, DC9, F28, F100, HS125, MD80, MD90
Nose Landing Gear
A318, A319, A320, A321,
B737, B757, C130
Optional Add-ons
- AP: Air Operated Hydraulic Pump
- GA: Load Gauge
- RH: Rain Hat
- AR: Air Retract (requires air operated hydraulic pump)
- SPC: Special Paint Color (yellow is standard)