Tronair 08-2034-0010 Universal Engine Work Stand
Create yours now for free.
Need a Quote?
The Tronair 08-2034-0010 Universal Engine Work Stand is designed to support safe, efficient aircraft engine maintenance by providing technicians with stable access to the engine during inspection, repair, and overhaul. Its three-point mounting system – using front mounting pads and a rear support post – helps secure the engine while allowing clear access to key components from multiple angles. To ensure proper fit and safe handling, this stand must be used with the correct adapter kit for your specific aircraft engine application.
Standard Features
- Heavy-duty welded steel construction
- Two swivel casters and two rigid heavy-duty casters for easy maneuverability
- Rigid casters are equipped with floor locks for securing the stand in a fixed position
- Convenient oil pan captures excess fluid to avoid damage to hangar floors
- Easily converted to accept left- and right-hand engines
- Multiple engine adaptability (engine adapter kits sold separately)
- Removable towbar with storage hooks
- Adapters change in minutes
- Durable powder-coat finish (Tronair Blue)
Specifications
- Dimensions: 60" H x 70" W x 133" L (152 x 178 x 338 cm)
- Weight: 650 lbs (295 kg)
Available Adapter Kits
- K-2685 – Pratt & Whitney PW-530A Engines
- K-2769 – Pratt & Whitney PW-545A Engines
- K-2770 – Garrett TFE731-1 to 5 Engines
- K-2776 – Pratt & Whitney JT15D-1 to 5 Engines
- K-2808 – Garrett TFE731-20 Engines
- K-3068 – Pratt & Whitney PW-535 Engines
- K-3152 – Pratt & Whitney PW-306A Engines
- K-3618 – Pratt & Whitney PW-308A Engines
- K-3842 – Pratt & Whitney PW-306C Engines
- K-4093 – Pratt & Whitney PWC-127 Engines
- K-4192 – Hawker 900XP 731-50R Engines
| General Information | |
|---|---|
| Part # | 08-2034-0010 |
| Manufacturer | Tronair |
| Shipping Information | |
|---|---|
| Shipping Weight | 1070 lbs. |
| Shipping Dimensions | 85 x 81 x 68 in. |
| Freight NMFC | 178160 |
| Schedule B | 8425420000 |
| ECCN | EAR99 |
Customers also viewed
Customers who bought this item also purchased
AIRCRAFT COMPATIBILITY
| Compatible Aircraft* | |
|---|---|
| Cessna |
Citation Sovereign 680
NOTE
An adapter kit (K-3842) is required for use with this stand.
,
Latitude 680A
NOTE
An adapter kit (K-3842) is required for use with this stand.
|
| Gulfstream |
G100 (Astra SPX)
NOTE
An adapter kit (K-2808) is required for use with this stand.
,
,
G200 (Galaxy)
NOTE
An adapter kit (K-3152) is required for use with this stand.
|
| Hawker Beechcraft |
Hawker 4000 (Horizon)
NOTE
An adapter kit (K-3618) is required for this stand.
|
| Lockheed | Jetstar C-140 |
PRODUCT REVIEWS
This item does not have any reviews yet.
QUESTIONS & ANSWERS
The Tronair 08-2034-0010 Universal Engine Work Stand is designed to support a wide range of aircraft engines when paired with the appropriate engine adapter kits. These adapter kits allow the stand to accommodate multiple engine models and configurations, making it suitable for varied maintenance environments. Always confirm engine compatibility before use to ensure proper fit and safe load distribution.
No, engine adapter kits are sold separately and must be selected based on the specific engine being supported. These kits ensure the engine attaches securely to the stand using the same mounting points specified by the aircraft or engine manufacturer. Selecting the correct adapter kit is essential for safe operation and proper engine alignment.
Yes, the Tronair 08-2034-0010 is designed to easily convert for left- or right-hand engine configurations. The main post assembly and rear engine support post are reversible, allowing technicians to adapt the stand to the engine’s orientation. This flexibility helps streamline maintenance workflows and reduce setup time.
Before each use, technicians should visually inspect the stand to ensure all components are present, secure, and undamaged. This includes checking fasteners, caster locks, pins, and structural members for wear or deformation. Using the stand with damaged or missing components can compromise safety and must be avoided.
The engine is secured using a three-point mounting system that includes front mounting pads and a rear support post. Once aligned, toggle clamps and mounting adapters are engaged to hold the engine firmly in place. This setup provides stability while allowing technicians full access to the engine during inspection and maintenance.
Yes, when maintenance is required on the rear of the engine – such as fan duct or thrust reverser work – the engine may be supported using only the front mounts. This capability allows greater access without removing the engine from the stand entirely. Technicians should follow approved procedures to ensure stability during partial support operations.
Routine maintenance includes periodic inspections, lubrication of caster bearings and moving components, and adjustment of toggle clamps as needed. Annual load testing is also recommended to verify structural integrity and load capacity. Following the manufacturer’s maintenance guidelines helps extend service life and maintain safe operation.
Yes, load testing should be performed annually or as specified by service conditions. The manufacturer recommends testing the stand with a controlled load and inspecting it afterward for signs of wear or failure. Load testing helps confirm that the stand can safely support engines within its rated capacity.
Yes, PJi offers OEM replacement parts and service kits for the Tronair 08-2034-0010 Universal Engine Work Stand. Using approved replacement parts helps maintain compliance with manufacturer specifications and preserves warranty coverage.
