Malabar 8899 95 Ton Aircraft Axle Jack - Auto-Retract

Item Superseded
This item has been discontinued or is no longer available.

A known replacement is available, but due to the complexity of this supersede you will need to contact us for more information.

CofC and 8130 available at no cost
Worldwide shipping available
Ask Our Aviation Specialists
Live Chat | +1.252.585.4553 | Email

Need a Quote?

Use this form to get a quote by email today.
First Name:
Last Name:
Company Name: (optional)
Questions/Comments: (optional)

The Malabar 8899 Auto-Retract Axle Jack is a 95-ton capacity two-stage telescoping hydraulic jack designed for use in jacking the main and/or nose landing gear of various aircraft. The hydraulic cylinder retracts automatically after each use. Simple and easy single valve control for aircraft raising and lowering. The jack consists of a two-stage cylinder assembly mounted on a spherical bearing (this bearing allows the jack ship adapter to follow the arc of the aircraft jack point, thus greatly reducing the stress on the jack's cylinder assembly as well as the aircraft axle and strut), base assembly, frame/reservoir assembly, valve block assembly, hand pump assembly, and control console.

Standard Features

  • Patented floating cylinder assembly allows unit to track arc of landing gear jack point, eliminating excessive side loads on jack and landing gear thus providing safer operation and extending jack life
  • Double acting auto-retract cylinder assembly incorporates a fluid bath for sealing surfaces to minimize corrosion and extend seal life. It also includes skydrol resistant seals and bronze upper bearings for longer service life
  • Auto-retract plungers remain fully retracted while jack is being towed or in storage to protect against corrosion, contaminants and accidental damage
  • Single valve control for simple and easy aircraft raising, lowering and auto-retract. Jack retracts to full retracted position automatically which provides for easy removal from under aircraft jack point after each operation
  • Control console with all controls conveniently mounted for ease of operation
  • 8" diameter heavy duty swivel casters and retractable front wheel with skydrol resistant tread. The tow handle actuated front wheel provides improved ground clearance for towing
  • Hydraulic fuse at the cylinder assembly prevents lowering of load in the event of a fluid line failure
  • Two manual hand pumps (one high pressure, low volume and one low pressure, high volume
  • Oil filter cap with filtered air vent and dipstick
  • Hard chrome plated cylinder and plunger bores
  • All unpainted parts are plated to resist corrosion
  • Skydrol resistant paint (safety yellow)
  • Factory proof load @ 150% of rated capacity
  • 1 year warranty
  • Fully enclosed shipping container with skid


  • Rated Capacity: 95 tons (86.0 m. tons)
  • Low Height: 10.5 inches (267 mm)
  • Hydraulic Lift: 10.88 inches (276 mm)
  • Extension Screw: 4.62 inches (117 mm)
  • Total Extended Height: 26 inches (660 mm)
  • Base Width: 10 inches (254 mm)
  • Cylinder Diameter: 9 inches (229 mm)
  • Oil Pressure at Rated Capacity: 8000 psig (562 kg/sq cm)
  • Safety Pop-off Valve set at: 101 tons (92 m. tons)
  • Proof Load: 118 tons (107 m. tons)
  • Floor Loading at Rated Capacity: 1000 psi (70 kg/sq cm)
  • Reservoir Capacity: 5.5 gallons (20.8 liters
  • Hydraulic Fluid: MIL-PRF-5606 or equivalent
  • Maximum Towing Speed: 5 mph (8 km/h)
  • Approximate Jack Net Weight: 580 lbs (263 kg)

Nose Landing Gear Applications

A300, A310, A319, A320, A321, A330 A340, A350-900, A380**, B727, B737, B747, B747-8, B767, B777*, B787, DC8, DC10, L1011, MD11
*Two 95P10AR jacks are required for this application
**Specify 1 1/4" Female Spherical Radius Ship Adapter p/n 885520 at a reduced aircraft axle jack load (less than 95 tons) for this application

Main Landing Gear Applications

A300, A310, A330, A340, A350-900, A380**, B727, B747, B747-8, B767, B777, B787, L1011 **Specify 1 1/4" Female Spherical Radius Ship Adapter p/n 885520 at a reduced aircraft axle jack load (less than 95 tons) for this application

Optional Add-Ons

  • AP: Air-Operated Hydraulic Pump
  • GA: Load Gauge
  • LPLU: Lubricator (requires standard air operated hydraulic pump)
  • HPLU: Lubricator (requires high speed air operated hydraulic pump)
  • RH: Rain Hat
  • SA: Ship Adapter p/n 885520 (1 1/4" female spherical radius)
  • SPC: Special Paint Color (yellow is standard)
Alternate Models
8899PKRepair Kit
General Information
Part #8899
Copyright © 2022 Pilot John International, a Carolina GSE Inc. Company