01-0560-0000 - Tronair 01-0560-0010 Towbar Head for Dassault Falcon Aircraft

The Tronair 01-0560-0010 towbar head is an attachment that connects a ground handling towbar to the nose gear tow fitting on specific Dassault Falcon aircraft. It enables maintenance crews and ground personnel to safely tow or reposition the aircraft during ramp operations, hangar moves, or maintenance activities. This component ensures a secure interface between the aircraft tow point and the towbar assembly.

The 01-0560-0010 towbar head is designed for use with several Dassault Falcon business jets, including the Falcon 50, 50EX, 900, 900EX, 2000, and 2000EX. These aircraft require a dedicated towbar head that matches the geometry of the nose landing gear tow fitting. Using the correct model ensures safe, reliable towing during ground handling procedures.

The Tronair 01-0560-0010 towbar head is designed to attach to the Tronair 01-1202-0000 Multi-Head Towbar. This modular system allows operators to use one towbar with multiple aircraft-specific towbar heads. By swapping towbar heads as needed, maintenance crews can support multiple aircraft types with a single towing platform.

This towbar head uses a sliding pin and a stationary pin to securely connect to the aircraft’s tow point. The sliding pin moves into position to lock the towbar head onto the aircraft fitting once properly aligned. This design helps ensure a firm connection and reduces the risk of accidental disengagement during towing operations.

Before towing, operators should inspect the towbar head for signs of bent components, worn pins, cracked welds, or missing hardware. A damaged towbar or towbar head should never be used because it may lead to equipment failure or aircraft damage. Proper pre-use inspections help maintain safe aircraft ground handling practices.

Attaching the towbar head to the aircraft first helps prevent unintended movement or misalignment during setup. Once the towbar is secured to the aircraft tow point, it can be safely connected to the tug. This recommended procedure helps reduce the risk of damage to the aircraft or ground support equipment.

The Tronair 01-0560-0010 towbar head is designed for aircraft with a maximum gross weight of approximately 49,000 lbs (22.2 metric tons). This weight rating aligns with the operational requirements of the Falcon aircraft models it supports. Operating within the specified limits helps ensure safe and reliable towing performance.

The 01-0560-0010 towbar head weighs approximately 35 lbs (15.9 kg). This weight provides the structural strength needed for towing operations while remaining manageable for technicians installing or removing the attachment. Proper handling techniques should still be used when installing the head on a towbar.

Routine maintenance checks should include inspecting the sliding pins, bushings, shear components, weldments, and locking hardware. Operators should verify that the sliding pin moves freely and that locking pins are secure and properly attached. Regular inspection helps detect wear or damage before it leads to equipment failure.

Using OEM replacement parts from Tronair ensures that the towbar head maintains its original strength, fit, and safety performance. Unauthorized modifications or non-approved components may compromise towing safety and can void manufacturer warranties. OEM parts help maintain compliance with manufacturer design specifications and operational standards.