Battery-Powered 28V DC Ground Power Units

A battery-powered 28V DC GPU is a portable unit that supplies 28-volt direct current to aircraft systems while the aircraft is parked. These units are designed to power avionics, lighting, and onboard systems during ground operations without needing to run the aircraft's engines or auxiliary power unit (APU). Battery-powered GPUs are often rechargeable and compact, making them ideal for hangar use, flight line support, and field maintenance tasks. They offer silent, emission-free operation, reducing environmental impact and noise levels.

Single-phase power refers to the delivery of electrical energy through a single alternating current (AC) line, commonly found in residential and light commercial facilities. In aviation, single-phase power is used to operate smaller, hangar-based GPUs that supply 28V DC or 115V AC power to light aircraft. These GPUs plug into existing hangar outlets and are ideal for operators without access to three-phase infrastructure. Their simplicity and accessibility make them popular for general aviation and maintenance shops.

Hangar-powered, single-phase GPUs offer several advantages for aircraft maintenance. They use readily available single-phase electricity, eliminating the need for costly three-phase installations. These units are typically lightweight and portable, allowing easy movement around hangars and workshops. In addition to powering onboard systems, they reduce wear on aircraft batteries and enable efficient ground operations at a lower cost.

A 28V DC GPU is specifically designed to match the electrical systems of many general aviation and military aircraft. It supplies safe, steady voltage to power avionics, lighting, and battery charging functions during maintenance or pre-flight checks. Using a 28V GPU helps prevent battery drain and ensures systems operate correctly before engine startup. This voltage standard is widely used in single-engine and light twin-engine aircraft.

Battery-powered 28V GPUs are best suited for light aircraft, turboprops, helicopters, and business jets with 28V DC electrical systems. These include models from Cessna, Piper, Beechcraft, Cirrus, and some rotary-wing aircraft. They are ideal for applications that require short bursts of power or intermittent system activation. Always verify compatibility using your aircraft’s ground power requirements before selecting a unit.

Battery-powered GPUs are quiet, emission-free, and self-contained, making them perfect for indoor hangar environments or remote airstrips. Their compact design allows easy positioning near the aircraft without relying on external power infrastructure. Since they don’t emit fumes or require fuel, they’re safer for enclosed spaces and reduce the risk of contamination around sensitive aircraft components.

Battery-powered GPUs offer mobility and simplicity unmatched by other types. While fuel-powered units provide higher power output for larger aircraft, they are heavier, noisier, and require more maintenance. Solid-state GPUs are efficient and reliable for continuous use but depend on external AC power and are less portable. Battery-powered units balance performance, convenience, and cleanliness – especially in smaller hangars or field service scenarios.

Key features to consider include power output (usually 28V DC), battery capacity, charging time, and mobility options such as wheels or handles. Safety features like over-voltage and short-circuit protection are also important. For single-phase models, confirm compatibility with standard 110V or 220V outlets and verify that the unit can support your aircraft’s startup and maintenance needs.

Yes, battery-powered ground power units are relatively low-maintenance compared to fuel-driven systems. Most models require periodic charging, occasional battery checks, and minimal cleaning. Modern lithium-ion or sealed lead-acid batteries offer long service life and quick recharge cycles. Built-in smart chargers and status indicators simplify maintenance and help prevent over-discharge or overheating.

Run time depends on the battery size, aircraft power demands, and usage patterns. For instance, a battery-powered GPU might provide 20 to 60 minutes of continuous 28V DC output for basic systems like lighting, avionics setup, or cabin pre-cooling. Some larger units offer enough capacity for multiple engine starts or several hours of low-draw operation. Always check manufacturer specs and match usage to your aircraft profile.

Some high-capacity 28V DC GPUs, especially those built with deep-cycle batteries, are designed to support turbine engine starts. However, not all battery-powered units are intended for this task, as engine starts require high peak amperage. It’s essential to choose a model rated for cranking amps if you plan to use it for turbine or piston engine startups.

Battery-powered GPUs produce zero direct emissions, reduce fuel consumption, and operate with minimal noise. They help lower the environmental impact of ground operations and support greener aviation practices. These units are especially beneficial in indoor hangars or eco-sensitive locations where fuel fumes and engine noise are concerns.

Aircraft batteries can degrade prematurely when used repeatedly for engine starts or powering systems on the ground. A 28V GPU supplies stable external power, reducing the load on the aircraft’s battery during preflight checks, avionics updates, or cabin conditioning. This helps preserve battery life and avoids unnecessary wear and tear.

Yes, hangar-powered single-phase GPUs are significantly more fuel- and cost-efficient than running the aircraft’s auxiliary power unit (APU). They eliminate fuel usage and reduce operating hours on expensive APUs, lowering long-term maintenance and replacement costs. For operators with multiple aircraft, a single GPU can service several units, improving overall resource efficiency.

To choose the right GPU, consider your aircraft's electrical system (DC or AC), required voltage and amperage, mobility needs, and whether you need power for engine starts or maintenance. Review specs for compatibility and consult with suppliers like PJi, who offer expert guidance and a wide range of GPU models from trusted brands like Start Pac.